stabilizer

[miguel ramos]

in the translated plans from Littner , for the stabilizer draw , show the legend use 3/32 mahogany ply for the cover skin.

I would like to know what say in the original French plans , I soupouse should be 2mm okoume ,

Im using birch , and acording to aditional info I should change 2mm okoume for 1,6 birch if using birch

tanks

[Jean-Claude Meunier]

I am a bit late to answer your question about 3/32 mahogany ply for the stabilator covering.

If it is similar to my Diamant stab, and I think it is, your can use 1.5 mm birch instead of the 2 mm mahogany but it will be a bit heavier! (and stronger).

Good luck!

[miguel ramos]

tanks