Hi Im building the tailplane ribs. and spar
-the plywood sheet for the webs in tailplane spar is one piece entirely each side ,or could be in 2 sections of plywood as the ply in the main spar for example ????
-the cap/semelle of the spar is in one piece ???
tanks
tailplane spar
-
- Formation Théorique
- Messages : 22
- Enregistré le : 19 déc. 2005 17:53
-
- Formation Théorique
- Messages : 20
- Enregistré le : 22 mai 2006 13:27
Re: tailplane spar
I think the webing can be in two pieces as long as you make the correct scarf joint between the two pieces of plywood.miguel ramos a écrit :Hi Im building the tailplane ribs. and spar
-the plywood sheet for the webs in tailplane spar is one piece entirely each side ,or could be in 2 sections of plywood as the ply in the main spar for example ????
-the cap/semelle of the spar is in one piece ???
tanks
Miguel, are you just starting to build the Beryl? Where are you located?
Roger
-
- Formation Théorique
- Messages : 22
- Enregistré le : 19 déc. 2005 17:53
beryl
yes , I have started building my beryl ,
now Im making the tailplane , as I m waiting for the tubes
Im in San Jose - Uruguay - Southamerica
I sent a email to you when you enter the forum , didn`t receive???
if you want to be in contact , sent a e mail to ,
sanjo@montevideo.com.uy
sanjo